Raportas • Board Game Arena

Visi raportai

Terra Mystica pranešimai

#102169: "Architechts cannot move a bridge from a town even though the remaining town would be large enough"

fixed: Klaida pataisyta

Apie ką šis pranešimas?

Terra Mystica #431256959

Kas nutiko? Pasirinkite iš žemiau esančio sąrašo

Žaidimo sąsaja neleido atlikti veiksmo, atitinkančio žaidimo taisykles

Kas nutiko? Pasirinkite iš žemiau esančio sąrašo

Žaidimo sąsaja neleido atlikti veiksmo, atitinkančio žaidimo taisykles

Patikrinkite, ar jau yra pranešimas apie tą patį dalyką

Jei taip, balsuokite už šią ataskaitą. Ataskaitos su dauguma balsų pateikiamos PRIORITETU!

#	Status	Votes	Game	Type	Title	Last update

Detalus apibūdinimas

Raportų istorija

2023 Oct 24. 18:13 • Xevoc • Klaida dar neištirta programuotojų:

I had town with SA, bridge, D, TP, another bridge and behind that bridge D and TP. The part with SA, bridge, D and TP is large enough for a town so I should have been able to move the other bridge using SH action, but game didn't allow me to do it. I think the check for being able to support the town doesn't take other bridges appropriately into account.

2023 Nov 2. 18:21 • Exline • Klaida dar neištirta programuotojų:

boardgamearena.com/9/terramystica?table=430263395

Experiencing a similar issue here in this live game.

I have a town with SH, 2 bridges, and 4 dwellings. Town marker is on d6. Also have a town in the center stretch with SA, 3 dwellings, and a bridge.

Attempting to move the bridge from d6-c5 down to d6-e8. My understanding - and I believe this has worked in the past - is that this should be legal because the bridge moving ability should check for town legality upon resolution of the bridge move. The d6 space with the town marker would be in a legal town grouping post bridge move (as it would now be bridged to the existing center town).

The game gives me the same error as Xevoc.

2023 Nov 6. 18:40 • Exline • Klaida dar neištirta programuotojų:

update: I thought my above issue was related to Xevoc's with not counting bridges as part of a town or something, but now I believe it is actually the mis-reporting of this linked issue as a bug which has caused the architects to lose functionality:

boardgamearena.com/bug?id=98107

Based on the verbiage as written on the SH, this is not a bug.

2023 Nov 25. 20:41 • Moonsteel • Klaida dar neištirta programuotojų:

boardgamearena.com/6/terramystica?table=439387022

Same error according to r1234

Its at the end

E3:tp - D3:sh - D3/C2:bridge - C2:d - C2/D4:Bridge - D4:d - E6:tp - F3:te - G2:sa - F3/G1:bridge - G1:d

the F3/G1:bridge should be movable since with it moved the town has enough power and buildings left to even satisfy 2 towns.

2023 Nov 25. 20:46 • Moonsteel • Klaida dar neištirta programuotojų:

Clarification, town tile location:
E3:tp - D3:sh - D3/C2:bridge - C2:d<TW6> - C2/D4:Bridge - D4:d - E6:tp - F3:te - G2:sa<TW1> - F3/G1:bridge - G1:d

<TW6> - 2cult 2key 2vp
<TW1> - 6c 5vp

2023 Nov 25. 22:55 • _Yotsuba_ • Klaida dar neištirta programuotojų:

I'm guessing that in Terra Mystica #431256959 there is some sort of issue with two town tiles being in the same big town. I'm thinking the game wants that to be two sepearate towns to allow a bridge move. If that is the case, I dont think the wording of the rules support that.

2023 Nov 26. 18:54 • r1234 • Klaida dar neištirta programuotojų:

Table #439387022
Move #308
Progression 84%

Same issue. The rules clearly should allow me to move the lowest of my three red bridges somewhere -- but that bridge (and the upper left red bridge, by my reading the rules) produce an error: "This Bridge can not be moved as it would break an existing Town".

2023 Nov 28. 11:28 • Rincevent123 • Klaida pataisyta:

Official solution from the game publisher:
When moving a bridge, check if any town marker on either side of the old
or new location of the bridge is affected by it. Each town marker still
needs to be supported by a sufficient number and power value of
buildings (and/or bridges). If the move of the bridge would make 2 (or
more) town markers part of the same town, the town needs to have a
sufficient number and power value of buildings to support ALL town
markers. So for example, joining 2 town markers means you need 8
buildings with a power value of 14 (or 7 buildings of the Sanctuary is
part of the town).

I updated the BGA implementation accordingly

Papildyti šį raportą

Pridėkite čia viską, kas atrodo svarbu, kad atkurti šią klaidą arba suprasti jūsų pasiūlymą:

Kitas stalo ID / ėjimo ID
Ar F5 išsprendė šią problemą?
Ar problemos atsirado keletą kartų? Kiekvieną kartą? Atsitiktiniu metu?
If you have a screenshot of this bug (good practice), you can use a picture hosting service of your choice (snipboard.io for example) to upload it and copy/paste the link here.

Atšaukti Atnaujinti raportą

#102169: "Architechts cannot move a bridge from a town even though the remaining town would be large enough"

Apie ką šis pranešimas?

Kas nutiko? Pasirinkite iš žemiau esančio sąrašo

Kas nutiko? Pasirinkite iš žemiau esančio sąrašo

Patikrinkite, ar jau yra pranešimas apie tą patį dalyką

Detalus apibūdinimas

Raportų istorija

Papildyti šį raportą

Pakeisti raporto būseną į:

Pagalba

Prisidėti

Naviguoti

Sekite mus